Factory supplied SNAP PIN/CONTTER PIN - Single Direction Thrust Ball Bearings D 10-130mm – Demy

Short Description:

WELCOME TO DEMY BEARING，WELCOME TO VISIT OUR FACTORY

Product Detail

Product Tags

We are also focusing on improving the stuff management and QC system so that we could keep great advantage in the fiercely-competitive business for Factory supplied SNAP PIN/CONTTER PIN - Single Direction Thrust Ball Bearings D 10-130mm – Demy, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Boundary dimensions (mm)										Load rating (KN)		Bearing numbers		Limiting speed (r/min)		Minimum load factors A	Abutment and fillet dimensions (mm)			Mass (approx.) (flat) kg
d	d1 min	D	D1 min	H	C	H1	r1,2 min	S	R	Cr	Cor	Flat housing washer	Sphered housing washer	Grease	Oil	Minimum load factors A	da min	Da max	ra max	Mass (approx.) (flat) kg
10	11.0	24	24	9	–	–	0.3	–	–	9.32	8.11	51100	–	7000	9500	0.0012	19	15	0.3	0.0188
10	12.0	26	26	11	–	11.6	0.6	8.5	22	12.70	10.40	51200	53200	6000	8000	0.0018	20	16	0.6	0.0282
12	13.0	26	26	9	–	–	0.3	–	–	9.67	9.49	51101	–	6700	9000	0.0014	21	17	0.3	0.0210
12	14.0	28	28	11	3.5	11.4	0.6	11.5	25	13.20	12.30	51201	53201	6000	8000	0.0012	22	18	0.6	0.0319
15	16.0	28	28	9	–	–	0.3	–	–	10.50	12.00	51102	–	6300	8500	0.0012	23	20	0.3	0.0219
15	17.0	32	32	12	4.0	13.3	0.6	12.0	28	13.40	14.50	51202	53202	5300	7000	0.0038	25	22	0.6	0.0430
17	18.0	30	30	9	–	–	0.3	–	–	10.80	13.40	51103	–	6300	8500	0.0014	25	22	0.3	0.0246
17	19.0	35	35	12	4.0	13.2	0.6	16.0	32	17.20	18.80	51203	53203	5000	6700	0.0047	28	24	0.6	0.0503
20	21.0	35	35	10	–	–	0.3	–	–	15.00	19.70	51104	–	5600	7500	0.0033	29	26	0.3	0.0371
20	22.0	40	40	14	5.0	14.7	0.6	18.0	36	21.10	23.90	51204	53204	4500	6000	0.0085	32	28	0.6	0.0746
20	22.0	47	47	18	–	–	1.0	–	–	34.30	36.30	51304	–	–	–	–	–	–	–	0.1490
25	25.2	45	45	14	–	–	0.6	–	–	14.80	29.70	F-2905	–	–	–	–	–	–	–	0.0919
25	26.0	42	42	11	–	–	0.6	–	–	15.40	23.90	51105	–	4800	6300	0.0033	35	32	0.6	0.0554
25	27.0	47	47	15	5.5	16.7	0.6	19.0	40	27.70	36.30	51205	53205	4000	5300	0.015	38	34	0.6	0.1070
25	27.0	52	52	18	–	19.8	1.0	21.0	45	35.70	42.10	51305	53305	3400	4500	0.018	41	36	1.0	0.1660
25	27.0	60	60	24	–	26.4	1.0	19.0	50	55.40	59.80	51405	53405	2600	3600	0.048	46	39	1.0	0.3370
30	30.2	50	50	14	–	–	0.6	–	–	19.10	40.10	F-2906	–	–	–	–	–	–	–	0.1060
30	32.0	47	47	11	–	–	0.6	–	–	16.60	29.40	51106	–	4500	6000	0.0067	40	37	0.6	0.0692
30	32.0	52	52	16	5.5	17.8	0.6	22.0	45	29.30	43.80	51206	53206	3600	4800	0.013	43	39	0.6	0.1340
30	32.0	60	60	21	7.0	22.6	1.0	22.0	50	47.10	57.20	51306	53306	2800	3800	0.026	48	42	1.0	0.2570
30	32.0	70	70	28	–	30.1	1.0	20.0	56	72.20	81.00	51406	53406	2000	3000	0.097	54	46	1.0	0.5230
35	35.2	55	55	16	–	–	0.6	–	–	22.90	49.40	F-2907	–	–	–	–	–	–	–	0.1320
35	37.0	52	52	12	–	–	0.6	–	–	19.10	35.90	51107	–	4300	5600	0.0086	45	42	0.6	0.0806
35	37.0	62	62	18	7.0	19.9	1.0	24.0	50	39.10	58.60	51207	53207	3000	4000	0.028	51	46	1.0	0.2090

Boundary dimensions (mm)										Load rating (KN)		Bearing numbers		Limiting speed (r/min)		Minimum load factors A	Abutment and fillet dimensions (mm)			Mass (approx.) (flat) kg
d	d1 min	D	D1 min	H	C	H1	r1,2 min	S	R	Cr	Cor	Flat housing washer	Sphered housing washer	Grease	Oil	Minimum load factors A	da min	Da max	ra max	Mass (approx.) (flat) kg
35	37.0	68	68	24	7.5	25.6	1.0	24.0	56	55.40	73.90	51307	53307	2400	3400	0.048	55	48	1.0	0.3710
35	37.0	80	80	32	–	34.0	1.1	23.0	64	86.40	102.00	51407	53407	1800	2600	0.15	62	53	1.0	0.7710
40	42.0	60	60	13	–	–	0.6	–	–	26.90	51.20	51108	–	3800	5000	0.015	52	48	0.6	0.1160
40	40.2	60	60	16	–	–	0.6	–	–	24.10	55.60	F-2908	–	–	–	–	–	–	–	0.1560
40	42.0	68	68	19	7.0	20.3	1.0	28.5	56	47.00	74.10	51208	53208	2800	3800	0.058	57	51	1.0	0.2620
40	42.0	78	78	26	8.5	28.5	1.0	28.0	64	68.90	95.80	51308	53308	2000	3000	0.077	63	55	1.0	0.5360
40	42.0	90	90	36	12.0	38.2	1.1	26.0	72	112.00	133.00	51408	53408	1700	2400	0.26	70	60	1.0	1.0900
45	45.2	68	68	16	–	–	0.6	–	–	21.40	55.10	F-2909	–	–	–	–	–	–	–	0.2000
45	47.0	65	65	14	–	–	0.6	–	–	27.90	57.50	51109	–	3400	4500	0.019	57	53	0.6	0.1400
45	47.0	73	73	20	7.5	21.3	1.0	26.0	56	47.50	81.50	51209	53209	2600	3600	0.038	62	56	1.0	0.3040
45	47.0	85	85	28	10.0	30.1	1.0	25.0	64	79.50	118.00	51309	53309	1900	2800	0.12	69	61	1.0	0.6800
45	47.0	100	100	39	12.5	42.4	1.1	29.0	80	130.00	240.00	51409	53409	1600	2200	0.37	78	67	1.0	1.4000
50	52.0	70	70	14	–	–	0.6	–	–	28.00	61.00	51110	–	3200	4300	0.024	62	58	0.6	0.1480
50	52.0	78	78	22	7.5	23.5	1.0	32.5	64	54.40	94.40	51210	53210	2400	3400	0.069	67	61	1.0	0.3650
50	52.0	95	95	31	11.0	34.3	1.1	28.0	72	96.20	146.00	51310	53310	1800	2600	0.19	77	68	1.0	0.9360
50	52.0	110	110	43	14.0	45.6	1.5	35.0	90	159.00	310.00	51410	53410	1500	2000	0.60	86	74	1.5	2.0000
55	57.0	78	78	16	–	–	0.6	–	–	34.70	78.70	51111	–	2800	3800	0.039	69	64	0.6	0.2230
55	57.0	90	90	25	9.0	27.3	1.0	35.0	72	69.40	123.00	51211	53211	1900	2800	0.11	76	69	1.0	0.5920
55	57.0	105	105	35	11.7	39.3	1.1	30.0	80	126.00	189.00	51311	53311	1600	2200	0.26	85	75	1.0	1.3100
55	57.0	120	120	48	–	50.5	1.5	28.0	90	178.00	360.00	51411	53411	1300	1800	0.79	94	81	1.5	2.5500
60	62.0	85	85	17	–	–	1.0	–	–	40.20	91.00	51112	–	2600	3600	0.054	75	70	1.0	0.2780
60	62.0	95	95	26	9.0	28.0	1.0	32.5	72	70.60	133.00	51212	53212	1900	2800	0.12	81	74	1.0	0.6630
60	62.0	110	110	35	11.5	38.3	1.1	41.0	90	129.00	209.00	51312	53312	1600	2200	0.26	90	80	1.0	1.3800
60	62.0	130	130	51	16.0	54.0	1.5	34.0	100	199.00	400.00	51412M	53412M	1100	1600	0.96	102	88	1.5	3.1000

Boundary dimensions (mm)										Load rating (KN)		Bearing numbers		Limiting speed (r/min)		Minimum load factors A	Abutment and fillet dimensions (mm)			Mass (approx.) (flat) kg
d	d1 min	D	D1 min	H	C	H1	r1,2 min	S	R	Cr	Cor	Flat housing washer	Sphered housing washer	Grease	Oil	Minimum load factors A	da min	Da max	ra max	Mass (approx.) (flat) kg
65	67.0	90	90	18	65.0	–	1.0	–	–	47.30	108.00	51113	–	2400	3400	0.06	80	75	1.0	0.3140
65	67.0	100	100	27	9.0	28.7	1.0	40.0	80	72.00	144.00	51213	53213	1800	2600	0.14	86	79	1.0	0.7410
65	67.0	115	115	36	12.5	39.4	1.1	38.5	90	139.00	229.00	51313	53313	1500	2000	0.30	95	85	1.0	1.5100
65	68.0	140	140	56	–	60.2	2.0	40.0	112	216.00	450.00	51413M	53413M	1000	1500	1.2	110	95	2.0	4.0000
70	72.0	95	95	18	–	–	1.0	–	–	47.80	114.00	51114	–	2400	3400	0.068	85	80	1.0	0.3400
70	72.0	105	105	27	9.0	28.8	1.0	38.0	80	76.00	162.00	51214	53214	1800	2600	0.16	91	84	1.0	0.7920
70	72.0	125	125	40	13.0	44.2	1.1	43.0	100	161.00	268.00	51314	53314	1400	1900	0.53	103	92	1.0	2.0000
70	73.0	150	150	60	19.5	63.6	2.0	34.0	112	234.00	500.00	51414M	53414M	950	1400	1.6	118	102	2.0	5.0000
75	77.0	100	100	19	–	–	1.0	–	–	48.10	120.00	51115	–	2200	3200	0.11	90	85	1.0	0.3820
75	77.0	110	110	27	9.5	28.3	1.0	49.0	90	77.10	172.00	51215	53215	1700	2400	0.17	96	89	1.0	0.8170
75	77.0	135	135	44	15.0	48.1	1.5	37.0	100	184.00	311.00	51315	53315	1200	1700	0.79	111	99	1.5	2.5900
75	78.0	160	160	65	21.0	69.0	2.0	42.0	125	251.00	560.00	51415M	53415M	900	1300	1.9	126	109	2.0	6.7500
80	82.0	105	105	19	–	–	1.0	–	–	50.00	130.00	51116	–	2000	3000	0.12	95	90	1.0	0.4060
80	82.0	115	115	28	10.0	29.5	1.0	46.0	90	86.40	193.00	51216	53216	1700	2400	0.22	101	94	1.0	0.9080
80	82.0	140	140	44	15.0	47.6	1.5	50.0	112	189.00	339.00	51316	53316	1200	1700	0.79	116	104	1.5	2.7200
80	83.0	170	170	68	22.0	72.2	2.1	36.0	125	270.00	620.00	51416M	53416M	850	1200	2.3	133	117	2.0	7.9500
85	87.0	110	110	19	–	–	1.0	–	–	49.30	131.00	51117	–	2000	3000	0.14	100	95	1.0	0.4240
85	88.0	125	125	31	11.0	33.1	1.0	52.0	100	97.90	229.00	51217	53217	1600	2200	0.39	109	101	1.0	1.2500
85	88.0	150	150	49	17.5	53.1	1.5	43.0	112	215.00	389.00	51317	53317	1100	1600	1.1	124	111	1.5	3.5200
85	88.0	180	177	72	–	77.0	2.1	47.0	140	286.00	680.00	51417M	53417M	850	1200	2.9	141	124	2.0	9.4500
90	92.0	120	120	22	–	–	1.0	–	–	66.50	177.00	51118	–	1800	2600	0.22	108	102	1.0	0.6520
90	93.0	135	135	35	13.5	38.5	1.1	45.0	100	125.00	277.00	51218	53218	1500	2000	0.55	117	108	1.0	1.6800
90	93.0	155	155	50	18.0	54.6	1.5	40.0	112	232.00	410.00	51318	53318	1000	1500	1.3	129	116	1.5	3.7300
90	93.0	190	187	77	25.5	81.2	2.1	40.0	140	307.00	750.00	51418M	53418M	800	1100	3.5	149	131	2.0	11.0000